| |
| |
| Warranty: |
The 20 Year, 110 mph Wind Warranty is available on orders to meet a project's specification. It provides a maximum of 20 years, 110 mph coverage for the repair or replacement of any portion of the roof edge system that has failed due to a defect in Metal-Era supplied materials.
|
| Testing: |
- Tested per ANSI/SPRI ES-1 Standard to a design pressure of 290 lbs./ft² to comply with the International Building Code.
- Factory Mutual 1-120 approved for wind up lift protection.
|
| Standard Sizes: |
Sizes range from 5 ½" up to 8 ½" face heights to accommodate multiple nailers and coverage requirements.
|
| Anchor Bar Protection: |
The patented, extruded aluminum anchor bar securely terminates the membrane. This provides protection unlike any other manufactured or shop-fabricated edge. The anchor bar is readily available to dry-in the roof structure.
|
| Available Materials: |
Covers can be manufactured in .040" aluminum.
|
| Watertight: |
Non-penetrating design eliminates the need for stripping-in or heat welding that is typical of many other roof edge designs. Watertight integrity is not compromised by improper flashing procedures, failed adhesives or lap sealants.
|
| Competitively Priced: |
The installed cost rivals even light gauge roof edge systems fabricated locally or in a roofer’s shop.
|
| Efficient Design: |
The product is provided in 4'-0" lengths with pre-punched holes for quicker installation and lower labor costs. The fastening holes are slotted to allow for proper thermal movement of the materials and ensure correct fastener placement and spacing.
|
| Colors: |
Choose among a wide range of standard colors and finishes that meet your job requirements. A 20 year Kynar 500® finish warranty is included on standard colors. Custom post-coated Kynar 500® colors are available with an included 10 year Kynar 500 finish warranty or a 20 year Kynar 500 finish warranty is available upon request. Anodized finishes are also available, but are not warranted.
|
| Custom Capabilities: |
Specially fabricated products are available to meet the unique needs of each project.
|
| Accessories: |
Factory fabricated miters provide a cleaner, more aesthetically pleasing appearance. This eliminates the need for field fabrication, providing time and labor savings.
|
| Also Included: |
All anchor bar EPDM splice plates and fasteners are included and will arrive to the job site with the product (sealant by others).
|
| Reuseable/Recyclable Material: |
When reroofing, the anchor bar can be removed, cleaned and reinstalled at any time without compromising its strength and appearance.
|