| |
| |
| Warranty: |
The Lifetime, 170 mph is available on all Metal-Era manufactured Anchor-Tite products. It covers replacement or repair of any portion of the system that has failed due to a defect in Metal-Era supplied materials. The warranty covers the roof edge for the lifetime of the roof on which it was originally installed.
|
| Testing: |
- Tested per ANSI/SPRI ES-1 Standard to a design pressure of 190 lbs./ft² to comply with the International Building Code.
- Factory Mutual 1-270 approved for wind up lift protection.
- Miami-Dade Approved (No. 08-0604.02 12/11/13) to comply with the “High Velocity Hurricane Zone of the Florida Building Code”.
|
| Standard Sizes: |
Sizes range from 8 ½" up to 13" face heights to accommodate multiple nailers and coverage requirements.
|
| Anchor Bar Protection: |
The patented, extruded aluminum anchor bar securely terminates the membrane. This provides protection unlike any other manufactured or shop-fabricated edge. The anchor bar is readily available to dry-in the roof structure.
|
| Available Materials: |
Covers can be manufactured in .050" and .063" aluminum.
|
| Splice Plates: |
Interlocking, concealed splice plate design prevents splice plate migration under the fascia panels. This creates a more aesthetically pleasing design compared to traditional cover plates or lap joints at the seams.
|
| Watertight: |
Non-penetrating design eliminates the need for stripping-in or heat welding that is typical of many other roof edge designs. Watertight integrity is not compromised by improper flashing procedures, failed adhesives or lap sealants.
|
| Competitively Priced: |
The installed cost rivals even light gauge roof edge systems fabricated locally or in a roofer’s shop.
|
| Efficient Design: |
Provided in 12'-0" lengths with pre-punched holes for quicker installation and lower labor costs. The fastening holes are slotted to allow for proper thermal movement of the materials and ensure correct fastener placement and spacing.
|
| Colors: |
Choose among a wide range of standard colors and finishes that meet your job requirements. A 20 year Kynar 500® finish warranty is included on standard colors. Custom post-coated Kynar 500® colors are available with an included 10 year Kynar 500 finish warranty or a 20 year Kynar 500 finish warranty is available upon request. Anodized finishes are also available, but are not warranted.
|
| Custom Capabilities: |
Radius and specially fabricated products are available to meet the unique needs of each project.
|
| Accessories: |
Factory fabricated miters, scuppers and drainage accessories provide a cleaner, more aesthetically pleasing appearance. This eliminates the need for field fabrication, providing time and labor savings.
|
| Also Included: |
All anchor bar EPDM splice plates and fasteners are included and will arrive to the job site with the product (sealant by others).
|
| Reuseable/Recyclable Material: |
When reroofing, the anchor bar can be removed, cleaned and reinstalled at any time without compromising its strength and appearance.
|