Submittal Builder

Submittal Builder

AnchorGard SP Fascia

Fully Adhered or Mechanically Attached RubberGard or UltraPly Version


AnchorGard SP Fascia provides your roof system with the maximum protection available against wind up-lift damage in today’s roofing market. Fast and effortless installation eliminates the stripping in typical of many other roof edge designs.

PRODUCT DOWNLOADS

Listed below are all the available documents for this product. Click the plus button to save the corresponding document to the Submittal Builder.
Specs
 
 
Anchor Bar Protection:
The patented, extruded aluminum anchor bar securely terminates the membrane. This provides protection unlike any other manufactured or shop-fabricated edge. The anchor bar is readily available to dry-in the roof structure.
Testing:
  • Tested per ANSI/SPRI ES-1 Standard to a design pressure of 290 lbs./ft² to comply with the International Building Code.
  • Factory Mutual 1-750 approved for wind up lift protection.
  • Miami-Dade Approved (No. 08-0604.02 12/11/13) to comply with the “High Velocity Hurricane Zone of the Florida Building Code”.
Standard Sizes:
Sizes range from 4" up to 8 ½" face heights to accommodate multiple nailers and coverage requirements.
  • 4"
  • 5 ½"
  • 7"
  • 8 ½"
Available Materials:
Covers can be manufactured in 24 ga. steel and .040" aluminum.
Watertight:
Non-penetrating design eliminates the need for stripping-in or heat welding that is typical of many other roof edge designs. Watertight integrity is not compromised by improper flashing procedures, failed adhesives or lap sealants.
Competitively Priced:
The installed cost rivals even light gauge roof edge systems fabricated locally or in a roofer’s shop.
Efficient Design:
Provided in 12'-0" lengths with pre-punched holes for quicker installation and lower labor costs. The fastening holes are slotted to allow for proper thermal movement of the materials and ensure correct fastener placement and spacing.
Colors:
Choose among a wide range of standard colors and finishes that meet your job requirements. A 30 year Kynar 500® finish warranty is included on coil-coated standard colors. Custom post-coated Kynar 500® colors are available with an included 10 year Kynar 500 finish warranty or a 20 year Kynar 500 finish warranty is available upon request.

Anodized finishes are also available and come with a 5 year warranty (no warranty available for coil anodized finishing. Post-coat/Class 1 Batch Anodized is available with a 5 Year warranty with an option to increase to a 10 Year warranty for an upcharge). Please email Technical Services regarding pricing for Anodized finishes.
Custom Capabilities:
Radius and specially fabricated products are available to meet the unique needs of each project.
Accessories:
Factory fabricated miters, scuppers and drainage accessories provide a cleaner, more aesthetically pleasing appearance. This eliminates the need for field fabrication, providing time and labor savings.
Also Included:
All anchor bar EPDM splice plates and fasteners are included and will arrive to the job site with the product (sealant by others).
Reuseable/Recyclable Material:
When reroofing, the anchor bar can be removed, cleaned and reinstalled at any time without compromising its strength and appearance.
Product Accessories
Training / Installation