Submittal Builder

Submittal Builder

Carlisle Products

SecurEdge 2000 Standard Fascia

SecurEdge 2000 Standard Fascia Fully Adhered or Mechanically Attached Single-Ply
Fully Adhered or Mechanically Attached Single-Ply Version
SecurEdge 2000 provides your roof system with the maximum protection available against wind up-lift damage in today’s roofing market.

SecurEdge 2000 HG Fascia

SecurEdge 2000 HG Fascia Fully Adhered or Mechanically Attached Single-Ply
Fully Adhered or Mechanically Attached Single-Ply Version
SecurEdge 2000 HG Fascia's fast and effortless installation eliminates the stripping-in typical of many other roof edge designs.

SecurEdge 2000 Standard Fascia for Larger Face Heights

SecurEdge 2000 Standard Fascia for Larger Face Heights
Fully Adhered or Mechanically Attached Version
SecurEdge 2000 is available in face heights up to 13" and in heavier gauges.

SecurEdge 200 Snap-on

SecurEdge 200 Fascia Snap-On
Single-Ply Application, Snap-On Version
This new version of SecurEdge 200 features a snap-on cover that eliminates crimping, substantially reducing installation time.

SecurEdge 200 Fascia System

SecurEdge 200 Fascia System Single-Ply Application, Crimp-On Version
Single-Ply Application, Crimp-On Version
SecurEdge 200 Fascia System is a formed two-piece fascia system for use with all single-ply roof membranes.

SecurEdge One

SecureEdge One
Single-Ply Application
  • 12' lengths with pre-punched holes
  • Quicker installation and lower labor costs

SecurEdge One Coping

SecurEdge One Coping
• ANSI/SPRI/FM 4435/ES-1
• Pre-punched holes for quicker installation

SecurEdge 200 1 Pc. Gravel Stop

SecurEdge 200 1 Peice Gravel Stop
SecurEdge 200 1 Piece Gravel Stops feature an "L" shaped continuous cleat with pre-slotted fastening holes for ease of locating and installing.

SecurEdge 200 Drip Edge

SecurWeld 200 Drip Edge
Kynar® Coated Version
SecurEdge 200 Drip Edge features an "L" shaped continuous cleat with pre-slotted fastening holes for ease of locating and installing.

SecurWeld™ 200 Drip Edge

SecurWeld 200 Drip Edge
TPO and PVC Coated Versions
SecurWeld 200 Drip Edge features an "L" shaped continuous cleat with pre-slotted fastening holes for ease of locating and installing.

SecurWeld™ 200 TPO Skirted Drip Edge

SecurWeld 200 TPO Skirted Drip Edge
with Factory Applied TPO Flashing

SecurEdge 2000 Drip Edge

drip edge
SecurEdge 2000 Drip Edge combines custom engineering and superior performance with an attractive appearance. The patented design of our extruded aluminum anchor bar securely terminates the EPDM or TPO membrane, providing protection superior to any other manufactured or shop-fabricated roof edge. The low profile roofing flange allows for water drainage as needed for drip edge conditions. This top-line drip edge provides the maximum protection against wind uplift damage that is available in today's roofing market. 

SecurEdge 200 Coping

SecurEdge 200 Coping
Tapered Version
SecurEdge 200 Coping utilizes a full snap-on design with 20 gauge galvanized steel anchor clips and factory applied stainless steel springs.

SecurEdge 200 Coping

SecurEdge 200 Coping
Flat Version
SecurEdge 200 Coping utilizes a full snap-on design with 20 gauge galvanized steel anchor clips and factory applied stainless steel springs.

SecurEdge 200 Coping for Use with Existing Slope

SecurEdge 200 Coping for Use with Existing Slope with Nailer
With Nailer Versions
SecurEdge 200 Coping utilizes a full snap-on design with 20 gauge galvanized steel anchor clips and factory applied stainless steel springs.

SecurEdge 200 Coping for Larger than 16'' Wall Size

SecurEdge 200 Coping for Larger than 16
Tapered Version
SecurEdge 200 Coping utilizes a full snap-on design with 20 gauge galvanized steel anchor clips and factory applied stainless steel springs.

SecurEdge 200 Coping for Over 6'' to 12'' Face Heights

SecurEdge 200 Coping for Over 6
Tapered Version
SecurEdge 200 Coping utilizes a full snap-on design with 20 gauge galvanized steel anchor clips and factory applied stainless steel springs.

SecurEdge 200 Coping for Over 6'' to 12'' Face Heights

SecurEdge 200 Coping for Over 6
Flat Version
SecurEdge 200 Coping utilizes a full snap-on design with 20 gauge galvanized steel anchor clips and factory applied stainless steel springs.

SecurEdge 200 Coping for Over 6'' to 12'' Face Heights with Masonry Attachment

SecurEdge 200 Coping for Over 6
Tapered Version
SecurEdge 200 Coping utilizes a full snap-on design with 20 gauge galvanized steel anchor clips and factory applied stainless steel springs.

SecurEdge 200 Coping for Use with Existing Slope without Nailer

SecurEdge 200 Coping Existing Slope with Stone Coping Version
SecurEdge 200 Coping utilizes a full snap-on design with 20 gauge galvanized steel anchor clips and factory applied stainless steel springs.

Carlisle Double Tapered Coping

Carlisle Double Tapered Coping
Carlisle Double Tapered Coping utilizes a full snap-on design for attachment to either treated wood nailers or atop masonry walls.

SecurEdge 200 Gold Coping

coping
Tapered Version
  

SecurEdge 200 Cantilever Coping

SecurEdge 200 Cantilever Coping
Perfect solution for attachment to a parapet wall with a non-structural exterior building facade.

SecurEdge 2000 Canted Fascia

SecurEdge 2000 Canted Wood Nailer
Existing Beveled Wood Nailer Version
SecurEdge 2000 Canted Fascia features a unique design that allows for the use of .050” and .063” aluminum fascia covers while keeping the flange out of the waterline.

SecurEdge 2000 Canted Fascia for Larger Face Heights

SecurEdge 2000 Canted Larger Face Wood Nailer
Existing Beveled Wood Nailer Version
SecurEdge 2000 Canted Fascia features a unique design that allows for the use of .050” and .063” aluminum fascia covers while keeping the flange out of the waterline.

SecurEdge 2000 Canted Fascia

SecurEdge 2000 Canted Waterdam
Galvanized Waterdam Version
SecurEdge 2000 Canted Fascia features a unique design that allows for the use of .050” and .063” aluminum fascia covers while keeping the flange out of the waterline.

SecurEdge 2000 Canted Fascia for Larger Face Heights

SecurEdge 2000 Canted Fascia for Larger Face Heights
Galvanized Waterdam Version
SecurEdge 2000 Canted Fascia features a unique design that allows for the use of .050” and .063” aluminum fascia covers while keeping the flange out of the waterline.

Carlisle Industrial Gutter System

Industrial Gutter System IG-1
IG-1 Version
Carlisle Industrial Gutters offer easy installation, outstanding performance and an attractive appearance.

Carlisle Industrial Gutter System

Industrial Gutter System IG-2
IG-2 Version
Carlisle Industrial Gutters offer easy installation, outstanding performance and an attractive appearance.

Carlisle Industrial Gutter System

Industrial Gutter System IG-B
IG-B Version
Carlisle Industrial Gutters offer easy installation, outstanding performance and an attractive appearance.

Carlisle Industrial Downspout

Industrial Downspout Closed Face Version
Closed Face Version
Carlisle's Industrial Downspout is fabricated in sizes to meet specific job requirements.

Carlisle Industrial Downspout

Industrial Downspout Open Face Version
Open Face Version
Carlisle's Industrial Downspout is fabricated in sizes to meet specific job requirements.

Garden-Tite Drain Bar

Garden-Tite Drain Bar
Garden-Tite Drain Bar
Engineered to work with all vegetative roof systems

Carlisle Inspection Chamber

Carlisle Inspection Chamber
Carlisle Inspection Chamber
Engineered to work with all vegetative roof systems

SecurEdge 2 Pc. Counter Flashing

SecurEdge Counter Flashing 2 Pc. Surface Mount
2 Pc. Surface Mount
 

SecurEdge 1 Pc. Counter Flashing

SecurEdge Counter Flashing 1 Pc. Surface Mount
Surface Mounted Version

SecurEdge Counter Flashing 1 Pc. Reglet

SecurEdge Counter Flashing 1 Pc. Reglet
Carlisle Counter Flashing 1 Pc. Reglet
 

SecurEdge 2 Pc. Counter Flashing

SecurEdge Counter Flashing 2 Pc. Reglet
2 Pc. Reglet
  

SecurEdge 2 Pc. Counter Flashing

SecurEdge Counter Flashing 2 Pc. Thru Wall
Thru Wall
 

Carlisle Termination Bar

Carlisle Termination Bar
 

Carlisle Arched Coping

Carlisle Arched Coping