Submittal Builder

Submittal Builder

FiberTite AT Drip Edge

Pitched Roof Flange


FiberTite AT Drip Edge combines custom engineering and superior performance with an attractive appearance. The patented design of our extruded aluminum anchor bar securely terminates the EPDM, PVC, or TPO membrane, providing protection superior to any other shop-fabricated drip edge.

The pitched roof flange allows for a non-strip in drip edge option for sloped roofs up to 4”/12” pitches when compared to conventional drip edge. With this unique design, it is easy to install and cuts down on the labor, while still providing the water drainage you need to protect your roof.  
Features / Benefits
 
 
Warranty:
A Full System Warranty is available through our partners which covers the entire roof system under one warranty. The system is inspected after the project is complete to assure proper installation. This ensures protection for the most vulnerable area of the roof against failure due to extreme wind up lift pressures. Contact the manufacturer's sales rep directly for more information.
Testing:
  • Tested per ANSI/SPRI/FM 4435/ES-1 Standard to a design pressure of 577 lbs./ft² to comply with the International Building Code.
  • Factory Mutual 1-585 approved for wind uplift protection.
Standard Sizes:
Sizes range from 3" up to 7 ½" face heights to accommodate multiple nailers and coverage requirements.
  • 3"
  • 4 ½"
  • 6"
  • 7 ½"
Anchor Bar Protection:
The patented, extruded aluminum anchor bar securely terminates the membrane. This provides protection unlike any other manufactured or shop-fabricated edge. The anchor bar is readily available to dry-in the roof structure.
Available Materials:
Covers can be manufactured in 24 ga. steel and .040" aluminum.
Watertight:
Non-penetrating design eliminates the need for stripping-in or heat welding that is typical of many other roof edge designs. Watertight integrity is not compromised by improper flashing procedures, failed adhesives or lap sealants.
Competitively Priced:
The installed cost rivals even light gauge roof edge systems fabricated locally or in a roofer’s shop.
Efficient Design:
Provided in 12'-0" lengths with pre-punched holes for quicker installation and lower labor costs. The fastening holes are slotted to allow for proper thermal movement of the materials and ensure correct fastener placement and spacing.

Low profile roof flange allows for water drainage as needed for drip edge conditions.
Colors:
Choose among a wide range of standard colors and finishes that meet your job requirements. A 30 year Kynar 500® finish warranty is included on coil-coated standard colors. Custom post-coated Kynar 500® colors are available with an included 10 year Kynar 500® finish warranty or a 20 year Kynar 500® finish warranty is available upon request.

Anodized finishes are also available and come with a 5 year warranty (no warranty available for coil anodized finishing. Post-coat/Class 1 Batch Anodized is available with a 5 Year warranty with an option to increase to a 10 Year warranty for an upcharge). Please email Technical Services regarding pricing for Anodized finishes.
Custom Capabilities:
Radius and specially fabricated products are available to meet the unique needs of each project.
Accessories:
Factory fabricated miters provide a cleaner, more aesthetically pleasing appearance. This eliminates the need for field fabrication, providing time and labor savings.
Also Included:
All splice plates and fasteners are included and will arrive to the job site with the product.
Reuseable/Recyclable Material:
When reroofing, the anchor bar can be removed, cleaned and reinstalled at any time without compromising its strength and appearance.
Product Accessories
Training / Installation