Submittal Builder

Submittal Builder

Dow System 200 Fascia

Crimp-On Version


Dow System 200 Fascia is a formed two-piece fascia system for use with all single-ply roof membranes. System 200 is fabricated from 24 ga. steel .040", .050" or .063" aluminum. A unique locking design securely positions fascia panels and eliminates splice plate migration, while allowing full expansion and contraction of the fascia material. No exposed fasteners, no unsightly cover plates and ease of installation highlight this FM approved roof edge system.

PRODUCT DOWNLOADS

Listed below are all the available documents for this product. Click the plus button to save the corresponding document to the Submittal Builder.
Features / Benefits
 
 
Warranty:
A Full System Warranty is available through our partners which covers the entire roof system under one warranty. The system is inspected after the project is complete to assure proper installation. This ensures protection for the most vulnerable area of the roof against failure due to extreme wind up lift pressures. Contact the manufacturer's sales rep directly for more information.
Testing:
  • Tested per ANSI/SPRI/FM 4435/ES-1 Standard to a design pressure of 150 lbs./ft² to comply with the International Building Code.
Standard Sizes:
Sizes range from 6 ½" up to 12 ½" face heights to accommodate multiple nailers and coverage requirements.
  • 6 ½"
  • 8"
  • 9 ½"
  • 11"
  • 12 ½"
Available Materials:
Its unique design allows for covers to be manufactured in 24 ga steel, .040", .050" and .063" aluminum.
Splice Plates:
Interlocking, concealed splice plate design prevents splice plate migration under the fascia panels. This creates a more aesthetically pleasing design compared to traditional cover plates or lap joints at the seams.
Watertight:
Non-penetrating design eliminates the need for stripping-in or heat welding that is typical of many other roof edge designs. Watertight integrity is not compromised by improper flashing procedures, failed adhesives or lap sealants.
Competitively Priced:
The installed cost rivals even light gauge roof edge systems fabricated locally or in a roofer’s shop.
Efficient Design:
This fascia is provided in 12'-0" lengths with pre-punched fastening holes in the galvanized waterdam to ensure correct fastener placement and spacing. The raised button-hole on the vertical face of the waterdam makes it easier to install.
Colors:
Choose among a wide range of standard colors and finishes that meet your job requirements. A 30 year Kynar 500® finish warranty is included on coil-coated standard colors. Custom post-coated Kynar 500® colors are available with an included 10 year Kynar 500® finish warranty or a 20 year Kynar 500® finish warranty is available upon request.

Anodized finishes are also available and come with a 5 year warranty (no warranty available for coil anodized finishing. Post-coat/Class 1 Batch Anodized is available with a 5 Year warranty with an option to increase to a 10 Year warranty for an upcharge). Please email Technical Services regarding pricing for Anodized finishes.
Custom Capabilities:
Radius and specially fabricated products are available to meet the unique needs of each project.
Accessories:
Factory fabricated miters, scuppers and drainage accessories provide a cleaner, more aesthetically pleasing appearance. This eliminates the need for field fabrication, providing time and labor savings.
Also Included:
All splice plates are included and will arrive to the job site with the product.
Product Accessories
Training / Installation