Submittal Builder

Submittal Builder

CM One Drip Edge


CM One Drip Edge is the best option when cost is a key factor for PVC or TPO roof systems.  CM One Drip Edge is specifically designed to simplify the heat welding flashing process and further save costs.  It is available in convenient 12' lengths with pre-slotted fastening holes.

PRODUCT DOWNLOADS

Listed below are all the available documents for this product. Click the plus button to save the corresponding document to the Submittal Builder.
Features / Benefits
 
 
Warranty:
The 10 Year, 90 mph Wind Warranty is available on orders to meet a project's specification. It provides a maximum of 10 years, 90 mph coverage for the repair or replacement of any portion of the roof edge system that has failed due to a defect in Metal-Era supplied materials.
Testing:
  • Tested per ANSI/SPRI/FM 4435/ES-1 Standard to a design pressure of 210 lbs./ft² to comply with the International Building Code.
  • Factory Mutual 1-225 approved
Standard Sizes:
Sizes range from 3 ¾" up to 8" face heights to accommodate multiple nailers and coverage requirements.
  • 3 ¾"
  • 4"
  • 5"
  • 6"
  • 7"
  • 8"
Available Materials:
This product's unique design allows for covers to be manufactured in 24 ga steel, .040" and .050" aluminum.
Watertight:
Innovative 22 ga. continuous rail counterflashes the membrane keeping it up and out of the waterline.
Competitively Priced:
The installed cost rivals even light gauge roof edge systems fabricated locally or in a roofer’s shop.
Efficient Design:
Provided in 12'-0" lengths with pre-punched holes for quicker installation and lower labor costs. The fastening holes are slotted to allow for thermal movement of the materials and ensure correct fastener placement and spacing.
Colors:
Choose among a wide range of standard colors and finishes that meet your job requirements. A 30 year Kynar 500® finish warranty is included on coil-coated standard colors. Custom post-coated Kynar 500® colors are available with an included 10 year Kynar 500® finish warranty or a 20 year Kynar 500® finish warranty is available upon request.

Anodized finishes are also available and come with a 5 year warranty (no warranty available for coil anodized finishing. Post-coat/Class 1 Batch Anodized is available with a 5 Year warranty with an option to increase to a 10 Year warranty for an upcharge). Please email Technical Services regarding pricing for Anodized finishes.
Custom Capabilities:
Specially fabricated products are available to meet the unique needs of each project.
Accessories:
Factory fabricated miters, scuppers and drainage accessories provide a cleaner, more aesthetically pleasing appearance. This eliminates the need for field fabrication, providing time and labor savings.
Product Accessories
Training / Installation